Best Logger Boots of 2023

According to the U.S. Occupational Health and Safety Administration (OHSA), logging is the most dangerous job in the country, and forestry can be equally hazardous—which means that protective, purpose-designed logger boots are a vital safety factor. The dangers are no less for those who fell trees for their own use.

There are plenty of choices, but as with all work boots, there can be a world of difference between the best logger boots and those you’ll want to avoid. The following review looks at all the key factors and offers our suggestions for the best logger boots currently available.

Best Overall: Georgia Boot 8″ Safety Toe Logger Boot

Best Budget: AdTec High Tech 9″ Logger Boots

Best Insulated: Chippewa 9″ Waterproof Insulated Steel-Toe EH Logger Boot

Best Waterproof: Carhartt 8″ Waterproof Composite Toe Leather Logger Boot

Best Made in the U.S.A.: Thorogood 1957 Series 8” Steel Toe Waterproof Work Boots

How We Picked the Best Logger Boots

Here at Field & Stream, we see a huge variety of different boots, and the best can often do double-duty. Top-rated logger boots also offer good versatility, and are popular with a number of other trades. However, for our purposes our focus was on their capabilities as a logger boot.

While several of our team members have experience of tree felling, none of us are professional loggers. In addition to the construction and safety features outlined above we also researched each of the leading manufacturers, a wide range of products, and current materials technology.

Brand was a key issue. We avoided little-known makers and stuck with those who have both a long-standing reputation for quality, and positive feedback from both independent experts and ordinary users. Value is important too, but in this case has to come second to performance. Durability over time is more important than low initial cost.

Best Logger Boots: Reviews and Recommendations

Best Overall: Georgia Boot Men’s 8″ Safety Toe Logger Boot

Specs

Sizes: 6 to 15 (including wides)

Heel Height: 2 inches

Safety Toe: Steel

Pros

Full-grain leather and Goodyear welt

Steel shank adds strength

Fully waterproof

Cons

Some time to break in

Three colors are brown, brown, or brown

A lot of the best logger boots have impressive specifications, but few can match the high standards of the Georgia Men’s Logger Boot. It gets top marks for toughness, safety, and comfort.

The upper is made of hard-wearing full-grain leather. A nice touch is the traditional kiltie that protects the tongue area. The sole is abrasion-resistant rubber, with deep lugs (tread) providing excellent grip while being wide enough apart to prevent clogging. The two are combined using a Goodyear welt.

A steel safety toe offers the necessary protection at the front, and there’s a steel shank running through the heel for added stability. The Georgia Men’s Logger Boot uses top quality GoreTex for waterproofing, and a three-layer “Comfort Core System” for the footbed that includes memory foam. This shapes itself to the wearer’s foot for cushioning and support.

The fact that they take a while to break in could be seen as a negative, but is a reflection of their structural strength. The size range is excellent, and pricing is competitive. The only small niggle is that they claim to be available in three colors, but all are similar shades of brown.

Best Budget: AdTec High Tech 9″ Logger Boots

Specs

Sizes: 6 to 14 (including wides)

Heel Height: 1.75 inches

Safety Toe: Steel

Pros

Oil tanned, full-grain leather

Goodyear welt construction

Very affordable

Cons

Interior is basic

Occasional quality control issues

It is not difficult to find cheap steel toe logger boots, but they may not last very long. Adtech’s Men’s Construction Utility Logger Boot sounds like a bit of a jack-of-of-trades, but despite the budget-friendly price it has many features we would look for in a top quality logger boot.

The upper is tough, full-grain leather. The sole is synthetic rubber with deep lugs. These are a bit close together along the edge, which can cause occasional clogging, but it’s a minor drawback. Construction uses Goodyear welt techniques, and a steel safety toe is included.

Given the low cost, savings had to be made somewhere. This appears to be inside the boot. They are fully waterproof, and there is a cushioned insole, but they have no moisture wicking liner, and no steel shank through the arch. They are not uncomfortable, and break in relatively quickly, but they don’t treat the feet as kindly as the leading brands.

While the Adtech’s are not full-on professional-standard logger boots, they are the best forestry boots we found for those on a budget, and a good choice for those felling their own trees or managing woodland.

Best Insulated: Chippewa 9″ Waterproof Insulated Steel-Toe EH Logger Boot

Specs

Sizes: 6 to 14 (including wides and extra-wides)

Heel Height: 2.25 inches

Safety Toe: Steel

Pros

Three layers of waterproofing and insulation

Excellent Vibram sole

American made

Cons

A little heavy

Premium price

Chippewa has been making outdoor work boots since 1901, and are often quoted as being the “gold standard” for logger boots, combining renowned durability with waterproofing and insulation for exceptional comfort in all weathers.. These 9-inch tall boots combine a long tradition of skilled craftsmanship with the latest in materials technology.

The upper is full-grain leather, there’s a steel safety toe, and construction uses the Goodyear-welt method. While these are all signs of high quality, the stand-out features of this boot are the interior and the sole. A Dri-Lex lining offers moisture wicking to control sweat. There is also a waterproof Chip-A-Tex membrane. Both are breathable. Finally there is 3M Thinsulate Ultra, perhaps the world’s best footwear insulation material.

The sole is made by Italian specialist Vibram. Every lug is designed to maximize traction. The rubber compound is slip- and oil-resistant, and offers tremendous grip in wet conditions. It also works equally well regardless of temperature. The high arch meets EH standards for safety.

By the brand’s own admission, the Chippewa is a “hefty” logger boot, though they don’t feel cumbersome on the move. Size range is excellent, and there are three different colors to choose from. They do come with a premium price tag but are made to an exceptional standard, and are arguably the most comfortable winter logging boots available.

Best Waterproof: Carhartt 8″ Waterproof Composite Toe Leather Logger Boot

Specs

Sizes: 8 to 15 (including wides)

Heel Height: 2 inches

Safety Toe: Composite

Pros

Waterproof, insulated, and breathable

High comfort insole

Meets EH safety standard

Cons

Not for smaller feet

Shorter than some

Almost all logger boots claim to be waterproof, but just how waterproof can vary. GoreTex is the industry-standard material, but Carhartt’s own Storm Defender breathable membrane is equally effective. However, that’s just one of the elements that make this our pick for best waterproof work boots for logging.

Like all the best logger boots, the upper is full-grain leather. Here it is triple stitched to provide durability in even the toughest conditions. The heel is reinforced with what Carhartt calls a “heel stabilizer,” this is a thermoplastic-polyurethane (TPU) insert that increases protection and support.

In addition to the waterproof membrane, the interior has 3M Thinsulate lining. It isn’t quite as efficient as the Ultra used in the Chippewa logger boot, but provides good warmth without overheating in milder conditions. A padded insole increases comfort, and spreads foot load to reduce fatigue.

Soles are slip-, oil-, and chemical-resistant with a deep lug pattern that provides good traction without clogging. The heel and arch incorporates a steel shank and meets the EH safety standard. Carhartt boots are competitively priced, though not available in the full range of smaller foot sizes.

Best Made in the U.S.A.: Thorogood 1957 Series 8” Steel Toe Waterproof Work Boots

Specs

Sizes: 8 to 14 (including wides)

Heel Height: ¾ inch

Safety Toe: Steel

Pros

Made in America

Waterproof

Very durable sole

Cons

Comparatively low heel

Limited sizes

Thorogood have been making work boots for 130 years. They are widely recognized for extreme durability, excellent safety, and high comfort. The Thorogood 1957 Series work boot is a prime example, hand-made in Wisconsin from super-tough full-grain saddle leather. Although perhaps not strictly a logger boot because of the lower heel, this American-made work boot has all the toughness and traction needed for forestry work.

These boots are fully waterproof with an external wax coating, a broad tongue that helps keep liquids out, and a breathable liner that is also moisture-wicking. A dual-density footbed adds shock absorption, and there is a removable insole for comfort. Construction uses the Goodyear Stormwelt method with an extra moisture seal layer between upper and sole.

The sole itself is Thorogood’s own deep-lugged Maxwear 90 design. Unusually, it is made of polyurethane. This is claimed to give extra traction, and last 30 percent longer than rubber competitors. It meets the OHSA-recognized ASTM standards for slip resistance, and electrical shock resistance to 18,000 volts (in dry conditions). A steel safety toe is fitted.

Some loggers prefer a taller heel, and the size range doesn’t cater for feet smaller than size 8. However, there are few better made or tougher boots on the market, and they make an outstanding general-purpose forestry boot.

What to Consider When Choosing Logger Boots

Logger boots may have to put up with more abuse than any other footwear. The work environment would play havoc with most normal boots. They need tremendous toughness, extreme traction, and outstanding safety, and they ought to provide all-day comfort in the worst weather conditions. The following areas should be looked at in detail:

Performance

It’s easy to say logger boots need to be tough, but what makes them that way? Leather is still the optimum material for the upper, usually full-grain. This is a flawless skin that only has the hair removed before tanning, thus retaining maximum strength. It may also have a wax or oil treatment to improve water-repelling ability.

Soles are almost always rubber compounds that are hard wearing, often slip- and oil-resistant, and have deep treads to maximize traction.

On the best logger boots, the two are put together using what is called a Goodyear welt construction. Upper, footbed, and outsole are interlocked before stitching. Not only does this provide great strength, it helps keep the elements outside. It also means that logger boots can be resoled by any skilled cobbler in the event of high wear or damage. A metal shank may be included running from the heel through the arch for additional support.

Protection

All logger boots should have safety toes. Steel-toe logger boots are common, but composite toes (which may be fiberglass, carbon fiber, or kevlar) are equally effective. Steel is less expensive; composite is lighter. They should be ASTM-rated (American Society for Testing and Materials), which guarantees they can withstand a 75-pound impact, or 2,500 pounds per square foot under compression. In professional environments, the OHSA demands logger boots achieve this standard, and all of our top picks qualify.

The designation Extended Heel (EH) is generally used to signify a standard of grip when climbing ladders. It is equally valid for logger boots as it offers secure footing when stepping over fallen branches or logs.

Comfort

The ankle area should have good stiffness to support the foot as it twists and turns. Although slip-on logger boots are available, most prefer a lace-up that cinches tight around the calf, and prevents twigs and leaf litter from getting inside. Traditionally, 10-inch logger boots were common, and knee-high logger boots were not unknown, but most are now 8 or 9 inches.

Insoles and padded footbeds offer not just comfort but also help absorb shocks. Materials like GoreTex and Thinsulate add waterproofing or insulation, but are also breathable. This, combined with moisture-wicking properties, helps prevent the sweat build up that causes blisters.

FAQs

Best Logger Boots: Final Thoughts

Best Overall: Georgia Boot 8″ Safety Toe Logger Boot

Best Budget: AdTec High Tech 9″ Logger Boots

Best Insulated: Chippewa 9″ Waterproof Insulated Steel-Toe EH Logger Boot

Best Waterproof: Carhartt 8″ Waterproof Composite Toe Leather Logger Boot

Best Made in the U.S.A.: Thorogood 1957 Series 8” Steel Toe Waterproof Work Boots

The Georgia Boots logger boot is an extremely impressive piece of footwear. It has all the qualities needed for one of the toughest jobs, and most difficult terrain. After the initial break-in period, it’s comfortable, too, which helps it stand apart from the other best logger boots. It isn’t insulated, but a decent pair of socks takes care of that. The AdTec work boot may not be made to quite the same exceptional standard, but still offers good strength and safety, and is a terrific value.

Why Trust Us

For more than 125 years, Field & Stream has been providing readers with honest and authentic coverage of outdoor gear. Our writers and editors eat, sleep, and breathe the outdoors, and that passion comes through in our product reviews. You can count on F&S to keep you up to date on the best new gear. And when we write about a product—whether it’s a bass lure or a backpack—we cover the good and the bad, so you know exactly what to expect before you decide to make a purchase.

The post Best Logger Boots of 2023 appeared first on Field & Stream.

Articles may contain affiliate links which enable us to share in the revenue of any purchases made.